How to setup your Wi-Fi 6 Pod for Fibre Internet

Installing Your Wi-Fi 6 Pod

Simply follow these three simple steps to set up your Wi-Fi 6 Pod and begin enjoying your Primus Business Internet service.

If you are configuring the Wi-Fi 6 Pod for the first time or trying to modify the Wi-Fi name/password, please refer to this article: Configuring / Managing your Wi-Fi 6 Pod

How to Set Up Your Wi-Fi Pod

1. Ensure that your modem is powered off by disconnecting the power cord..
   1. Position your Wi-Fi pod beside your modem. Utilize the Ethernet cable provided with your Wi-Fi Pod to connect one end to LAN Port 1 on your modem and the other end to a port on your Wi-Fi pod.
   2. Power up your modem and connect your Wi-Fi pod by plugging it in.
   3. Allow some time for the light on your Wi-Fi pod to turn solid green, usually within about 5 minutes.
2. You can now start connecting your devices to your business Wi-Fi network.
   
   1. Select the network name that corresponds to the one displayed on the bottom of your Wi-Fi pod on the device you wish to connect.
   2. Enter the password located on the bottom of your Wi-Fi pod to complete the connection process.
3. The light on the pod tells you its status:
   • Green: The Wi-Fi pod is now ready for use.
   • Yellow: Indicates that the Wi-Fi pod is booting up.
   • Blue: Indicates that the Wi-Fi pod is currently in the process of setting up.
   • Red: Indicates that the Wi-Fi pod is not functioning correctly or has not been set up properly.
     
     

We've also included tips below to help you get the best Wi-Fi in your Business.